Tomato


Kernel Version vs Firmware Version 6
In March of last year, I published this article claiming that the latest (at the time) DD-WRT builds based on the Linux 2.6 kernel (K2.6) ran faster on a Linksys/Cisco E4200 router than their K3.x counterparts. Since then, I’ve heard apocryphal stories from some in the DD-WRT forums that the […]

DD-WRT K2.6 vs K3.x vs Tomato Router Firmware Head to ...


Linksys WRT54G 4
I said “goodbye” to a couple of good friends today when I asked them to step down and retire after years of stellar performance. These two old friends were the last remaining Linksys WRT54G routers in use on any of my networks. I replaced them today, and in doing so, […]

Saying Goodbye To An Old Friend: Linksys WRT54G


WRT54G 12
Like many owners of the ubiquitous Linksys WRT54G wireless router, I like to run aftermarket firmware on my device to unlock more of this router’s potential. I use one as my primary wireless router in my house, but I also use some as wireless Ethernet client bridges and wireless repeaters. […]

Bricked WRT54G with Blinking Power Light. Hard reset? TFTP? Nope ...



1
If you’re using an AT&T 3G MicroCell to help boost your cell phone range, and you have your 3G MicroCell set up behind a firewall, you should set up the Quality of Service settings (more commonly referred to as QoS settings) on your router to give your voice calls the […]

Set Up QoS in Tomato or DD-WRT for AT&T 3G ...